Home • About

About

Welcome on my little blog! On this blog you will find all things regarding ARM based devices and how to modify them.

My purpose of this blog is to show users some tips and howto’s about modifying and running your own software on your device.

Author:langerak

4 responses to “About”

  • Tjalling 18-04-2016 at 21:08 Reply 

    Hi I’ve read your article about the upgrading of the uboot version on the networkspace v2 (http://www.arm-blog.com/update-uboot-on-the-networkspace-2/) I was wondering if your compiled u-boot image contains GPT support (>2TB disks), and if you would like to share it with me. I have a hard time compiling it myself and I’m afraid I will brick my device. Many thanks, Tjalling


  • Tagin Eli 01-01-2017 at 09:09 Reply 

    Thanks a lot on your side
    Please I need help iwth “ssg5”
    I want check the ssg5 that the device go to internet
    I have a modem router name DGN2200v2
    I can define the DGN2200v2 to brigde
    Wat I need do that i can go out to internet from port 00.
    Thanks a lot


    • langerak 06-02-2017 at 11:21 Reply 

      Hi,

      I’m not sure what you are trying to accomplish, neither do I support Juniper devices myself. My best bet is that you need to have the modem in bridge mode so that the SSG5 takes over the router parts and the modem itself is wel… just a modem.

      Juniper does have a excellent forum and documentation on that part, so you may want to try that out. Let me know if you succeed!

      Kind regards,

      Jeffrey


  • Gem Arcega 11-04-2017 at 00:43 Reply 

    Hi Langerak,

    First of all, I want to congratulate you for a great blog site. I noticed your article about an SRX100: https://www.arm-blog.com/reinstalling-juniper-srx100-corrupt-flash-via-cli/. Would it be possible if you can share me a copy of the firmware package you used? I badly need it. Please. Hoping to hear from you. Thanks.

    Sincerely,
    Emps


Leave a Reply

Your email address will not be published. Required fields are marked*

*

*